Specs:
1 - 1000k-1400kV (faster) brushless outrunner motor
1 - 11.1v 1200-1500mah 15-20c lipo battery
1 - 25-30 amp speed controllers (esc's)
1 - 10x6 or 9x5 propeller
3 - 9 gram servos (add a fourth if you want a rudder) |
Build Materials:
35" x 25" sheet of 1/4 inch foam core (foam board) for the fuselage/wings/tail
8 popsicle sticks - 2.5" x 3/8" x 1/12"
16 gauge galvanized steel wire roll or standard RC pushrods
(20" needed)
(Or substitute 1/16 Drill Rod (hardware store) for pushrods)
Hot glue/hot glue gun or 5 min epoxy
1.5" - 2" packing tape for control surface hinges
8 - 12" wooden BBQ skewers
1/2" - 1" Velcro with sticky back to attach speed controllers and batteries
|
